The weather is getting hotter, so the maintenance of the digital printing machine must be done.
In the high temperature in summer, the digital printing machine is easy to break down. For example, the electronic components in it are very prone to problems. So this period requires our special attention to the digital printing machine.
The temperature in summer is relatively high and the operating temperature of the digital printing machine has high requirements. It must be controlled when the digital printing machine works, otherwise, it will not only cause damage to the machine, but also the printed product. There will be printing errors and there will be a large color difference in color. This is not only bad for digital printers but also has a great impact on the products produced. The defective rate caused by printing will greatly increase. Therefore, the production of digital printing is best operated in a constant temperature environment.
Drying is not only caused by high temperature, but high temperature generally occurs dry. So during high temperatures, you must pay attention to anti-static, anti-dry ink. At this time, you can spray some water on the ground to help prevent the indoor air from being too dry. At the same time prevent static electricity from the grounding wire of the printing machine.
Moreover, in high-temperature environments, it is best to separate the power strips. The printing machine and the computer should be equipped with a special strip, and other electrical appliances can be equipped with another strip so that it can better protect against overheating.
Everyone knows that the summer in the south is in high temperature and rain most of the time. If the humidity is too high, it will often affect the drying speed of the ink on the fabric during the printing process. In order to avoid the ink be not dry and sticky, it is recommended to carry out the production operation in a constant temperature and humidity production workshop.
In addition, in the case of humid weather, if there is no constant temperature and humidity production workshop, you can use a dehumidifier to dehumidify. And it must be remembered that the main casing of the digital printing machine must be covered to prevent the moist air from invading the relevant circuit boards and components inside.
Of course, temperature and humidity cannot be determined according to your own feelings, so in order to obtain accurate data, strictly control the indoor temperature and humidity, it is best to place a thermometer and a hygrometer indoors for easy viewing and timely adjustment.
Finally, there is the issue of hygiene. The workshop must pay attention to dust prevention and ensure that the production environment is relatively clean. If the air is full of particles and dust during the production process, it will affect the print quality of the product.
The weather is getting hotter and hotter, we must maintain the printing machine very carefully for the quality of the product.
If a worker wants to do his job well, he must first sharpen his weapon.